
Alfa Tonale 2026
TPMS Reset / Tyre Pressure Monitor
Alfa Tonale Reset Tyre Monitor / Calibration
System initialisation
After tyre pressure correction or wheel change, the system must be initialised to learn new circumference reference values:
always ensure that all four tyres have correct tyre pressure apply the electric parking brake initialise the system via the Connect system ("Settings" > "Vehicle" > "Safety")
reset is confirmed by pop-up indication
After initialisation system automatically calibrates to new tyre pressures during driving.
After longer drive the system will adopt and monitor new pressures.
The Tyre Underinflation Detection signals the driver a possible insufficient pressure if this falls below the warning limit for any reason.
Always check tyre pressure with cold tyres.
The system will not warn instantaneously on a tyre blow out or a rapid deflation.
This is due to requires calculation time.
System has to be reinitialised when:
(1) The tyre pressure has been changed.
(2) Load condition has been changed.
(3) Wheels have been swapped or exchanged.
(4) Tyre pressure is affected by temperature decrease.
(5) When the space-saver wheel is fitted.
In these cases the system can require a Reset.
Manufacturer Year: 2026 · Tyre Size: 235/50R18
Before resetting the tyre pressure monitor: Alfa Tonale 2026
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.