Audi A7 2011 to 2018
TPMS Reset / Tyre Pressure Monitor
Audi A7 Reset Tyre Monitor / Calibration
Storing Tyre Pressures
Set all four tyres to the specified pressures. Switch the ignition on. In the MMI select CAR > Car systems > Servicing & checks > Tyre pressure monitoring > Store tyre pressures and confirm. Store them again after any pressure, tyre or wheel change.
Manufacturer Year: 11 - 18 · Tyre Size: 235/55R17
Before resetting the tyre pressure monitor: Audi A7
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.