Audi Q3 2011 to 2026
TPMS Reset / Tyre Pressure Monitor
Audi Q3 Reset Tyre Monitor / Calibration
Storing Tyre Pressures
Make sure all four tyres are at the correct pressures for the vehicle load and switch the ignition on. Select CAR > Car systems > Servicing & checks > Tyre pressure monitoring > Store tyre pressures > Yes, store now. Repeat after adjusting pressures or changing tyres or wheels.
Manufacturer Year: 11 - 26 · Tyre Size: 215/65R16
Before resetting the tyre pressure monitor: Audi Q3
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.