Audi Q3 2018 Tyre Pressure Reset (TPMS)
TPMS Reset / Tyre Pressure Monitor
How to reset / calibrate your 2018 Audi Q3 tyre pressure monitoring system
Storing Tyre Pressures
Make sure all four tyres are at the correct pressures for the vehicle load and switch the ignition on. Select CAR > Car systems > Servicing & checks > Tyre pressure monitoring > Store tyre pressures > Yes, store now. Repeat after adjusting pressures or changing tyres or wheels.
Before resetting the tyre pressure monitoring system for the Audi Q3
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.