Audi Q5 2008 to 2016
TPMS Reset / Tyre Pressure Monitor
Audi Q5 Reset Tyre Monitor / Calibration
Storing Tyre Pressures
Set all four tyres to the correct pressures and switch the ignition on. In the MMI select CAR > Car systems/Systems > Servicing & checks > Tyre pressure monitoring > Store tyre pressures, then confirm. Repeat after adjusting pressures or replacing tyres or wheels.
Manufacturer Year: 08 - 16 · Tyre Size: 255/40R21
Before resetting the tyre pressure monitor: Audi Q5
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.