Citroen C1 2015
TPMS Reset / Tyre Pressure Monitor
Citroen C1 Reset Tyre Monitor / Calibration
Reinitialisation of the system is done with the ignition on (ignition switch in the "ON" position or "ON" mode) and the vehicle stationary.
► Open the glove box.
► Press the reinitialisation button. (see above image)
► The flat tyre warning lamp flashes 3 times in the instrument panel when the reinitialisation is done.
► Wait a few minutes before switching off the ignition (ignition switch in the "ACC" or "LOCK" position, or "OFF" mode).
Please Note:
The system monitors the pressures in the four tyres, once the vehicle is moving.
It compares the information given by the four wheel speed sensors with reference values, which must be reinitialised every time the tyre pressures are adjusted or a wheel changed.
The system triggers an alert as soon as it detects a drop in the inflation pressure of one or more tyres.
Manufacturer Year: 2015 · Tyre Size: 165/60R15
Before resetting the tyre pressure monitor: Citroen C1 2015
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.