Send a Text: 07451277211
Normal Hours: Mon - Fri 8am - 6pm Saturday 9am - 12pm
Out of Hours: 24 Hour Emergency Service

Citroen C3 Reset Tyre Monitor / Calibration Info

Citroen C3 Reset Tyre Monitor / Calibration Info

Reinitialisation

It is necessary to reinitialise the system every time one or more tyre pressures are adjusted, and after changing one or more wheels.

Before reinitialising the system, ensure that the pressures of the four tyres are correct for the use of the vehicle and in line with the recommendations on the tyre pressure label.

The under-inflation alert can only be relied on if the reinitialisation of the system has been done with the pressures in the four tyres correctly adjusted.

The under-inflation detection system does not give a warning if a pressure is incorrect at the time of reinitialisation.

Reinitialisation of the system must be done with the ignition on and the vehicle stationary:

  • In the vehicle configuration menu, for vehicles fitted with a display screen,
  • Using the instrument panel display or the button on the dashboard, for vehicles without a display screen.

Touch screen

Reinitialisation of the function is done Instrument panel display in the Driving menu.

► In the Driving menu, select the “Driving functions” tab.
► In the page, select the “Under-inflation initialisation” function.
► Select “Yes” to confirm.

The reinitialisation is confirmed by the display of a message and an audible signal.

Monochrome screen C

Reinitialisation of the function is done in the “Personalisation configuration” menu of the screen.

► Select the “Define the vehicle parameters” menu.
► Select the “Comfort” menu.
► Select the “Tyre inflation” menu.
► Select the “Reinitialisation” function.
► Select “Yes” to confirm.

The reinitialisation is confirmed by an audible signal.

Instrument panel display

► Make a short press on this button to access the menu.
► Select the corresponding item then confirm.

A high tone audible signal confirms the reinitialisation.
A low tone audible signal indicates that thereinitialisation was not completed.

Dashboard button

► Make a long press on this button.

A high tone audible signal confirms the reinitialisation.
A low tone audible signal indicates that there initialisation was not completed.