Fiat Doblo

Fiat Doblo Tyre Size Converter - Wheel View

Tyre Size Converter - Wheel View

Tyre Size Converter - Wheel View

Original tyre
Comparison tyre

Side view comparison

Diameter check only

Tread view comparison

Original tyre

Comparison tyre

View recommended tyre size conversions

Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.

Fiat Doblo wheel fitment and alloy wheel options

Compare the wheel and tyre proportions above, then check the mounting details for your Fiat Doblo. Match the application to your engine and trim; wheel diameter alone does not determine whether an alloy wheel fits. The saved applications below remain tied to this vehicle selection when you change the preview tyre sizes.

PCD and centre bore

Recorded bolt pattern: 5x98. Recorded centre bore (mm): 58.1.

Wheel offset (ET)

Recorded offset (ET mm): 37. Offset describes the mounting face position relative to the wheel centreline. Read front and rear values separately; individual listed offsets do not define a universal minimum-to-maximum range.

Rim width and diameter

Wheel width and diameter combinations are not recorded here. Confirm that the selected tyre is approved for the chosen rim width. A larger diameter can provide a different visual balance, but wheel width and offset also determine inner and outer clearance. The drawings compare nominal tyre dimensions; they do not simulate spoke or brake clearance.

Wheel fixings and fitting checks

Wheel fixing specifications are not recorded for this selection. Confirm whether bolts or nuts are required, together with thread, seat type and fixing length. Use the specified fixing seat and tightening torque for the actual application. Check wheel load capacity, brake and hub clearance, and TPMS or valve requirements before fitting.

View recorded wheel details for your Fiat Doblo

Match the application scope, variant and listed tyre size. A blank field is shown as not recorded; changing the preview does not create an approved fitment.

Saved wheel applications for Fiat Doblo
SpecificationApplication 1Application 2Application 3Application 4
Listed tyre size185/65R15195/65R15195/60R16175/70R14
PCD (bolt pattern)5x985x985x985x98
Centre bore (mm)58.158.158.158.1
Front offset (ET mm)37373737
Rear offset (ET mm)37373737
Listed wheel torque (Nm)10010010086

Keep tyre-width changes modest and check clearance at full steering lock and through suspension travel. Select a suitable wheel width and offset for a spacer-free fit; spacers are not an automatic solution to rubbing. PCD and centre bore matches alone do not confirm that an aftermarket wheel fits.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Other Fiat Doblo Vehicle Information