Tyre sizes
- 175/70R14
- 185/65R14
- 195/55R15
- 195/60R15
PCD: 4x108Front Offset: 47Rear Offset: 47Centre Bore: 63.4
Ford Focus Wheel Fitment, PCD, Offset & Centre Bore
Wheel Fitment, PCD, Offset & Centre Bore
Ford Focus Wheel Fitment, PCD, Offset & Centre Bore
Tyre sizes
- 205/50R16
- 215/40R17
PCD: 4x108Front Offset: 47.5Rear Offset: 47.5Centre Bore: 63.4
Tyre sizes
- 195/55R16
- 215/45R17
PCD: 4x108Front Offset: 47.5Rear Offset: 47.5Centre Bore: 63.4
Tyre sizes
- 225/40R18
PCD: 4x108Front Offset: 42Rear Offset: 42Centre Bore: 63.4
Tyre sizes
- 235/35R19
PCD: 5x108Front Offset: 52.5Rear Offset: 52.5Centre Bore: 63.4
Tyre sizes
- 195/65R15
- 205/50R17
- 205/55R16
- 225/40R18
PCD: 5x108Front Offset: 52.5Rear Offset: 52.5Centre Bore: 63.4
Tyre sizes
- 225/40R18
PCD: 5x108Front Offset: 47.5Rear Offset: 47.5Centre Bore: 63.4
Tyre sizes
- 235/35R19
PCD: 5x108Front Offset: Not recordedRear Offset: Not recordedCentre Bore: 63.4
Tyre sizes
- 205/55R16
- 215/50R17
- 215/55R16
- 235/40R18
PCD: 5x108Front Offset: 52.5Rear Offset: 52.5Centre Bore: 63.4
Tyre sizes
- 215/50R17
- 235/35R19
- 235/40R18
PCD: 5x108Front Offset: Not recordedRear Offset: Not recordedCentre Bore: 63.4
Tyre sizes
- 205/55R16
- 215/50R17
- 215/55R16
- 235/40R18
PCD: 5x108Front Offset: 52.5Rear Offset: 52.5Centre Bore: 63.4
Understanding wheel fitment measurements: Ford Focus
PCD and centre bore
PCD describes the number of fasteners and the diameter of their bolt circle: for example, 5 × 100 means five fixing positions on a 100 mm circle. Centre bore is the opening that locates the wheel on the hub. A matching number of bolts alone does not establish compatibility.
What offset means
Offset, often marked ET, is the distance between the wheel centreline and its mounting face, in millimetres. Along with wheel width, it affects the position of the wheel relative to the suspension and bodywork. Check front and rear requirements separately where listed.
Before fitting replacement wheels
Confirm wheel width, diameter, load rating, brake clearance, tyre compatibility and the correct fastener seats and lengths as well as these measurements. A blank value is unknown, not zero. Sizes grouped together share the recorded figures; that alone is not approval to interchange complete wheel assemblies.