Ford Puma 2020 to 2026
TPMS Reset / Tyre Pressure Monitor
Ford Puma Reset Tyre Monitor / Calibration
RESETTING THE TYRE PRESSURE MONITORING SYSTEM - VEHICLES WITH: 4.2 INCH INSTRUMENT CLUSTER DISPLAY SCREEN (FOR 12.3 INCH INSTRUMENT CLUSTER - SEE BELOW)
1. Settings > Press the menu button.
2. Information > Press the OK button.
3. Tyre Pressure > Press the OK button.
4. Reset > Press and hold the OK button until the system reset confirmation appears.
RESETTING THE TYRE PRESSURE MONITORING SYSTEM - VEHICLES WITH: 12.3 INCH INSTRUMENT CLUSTER DISPLAY SCREEN (FOR 4.2 INCH INSTRUMENT CLUSTER - SEE ABOVE)
1. Press the menu button on the steering wheel to enter the information display main menu.
2. Select Settings.
3. Select Tyre Monitor.
4. Press and hold the OK button until the system reset confirmation appears.
Manufacturer Year: 20 - 26 · Tyre Size: 215/55R17
Before resetting the tyre pressure monitor: Ford Puma
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.