Hyundai Bayon 2022 to 2026
TPMS Reset / Tyre Pressure Monitor
Hyundai Bayon Reset Tyre Monitor / Calibration
Storing Tyre Pressures
If the tyre pressure has been changed or a tyre is replaced, it must be reset by pressing the TPMS reset button on the dash, this is located just behind the right side of the steering wheel.
Press and hold the button until it confirms the reset on the dash.
Manufacturer Year: 22 - 26 · Tyre Size: 185/65R15
Before resetting the tyre pressure monitor: Hyundai Bayon
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.