Jaguar E-PACE 2023 Tyre Pressure Reset (TPMS)
TPMS Reset / Tyre Pressure Monitor
How to reset / calibrate your 2023 Jaguar E-PACE tyre pressure monitoring system
Resetting of the TPMS (Tyre Pressure Monitoring System) is not required on vehicles with pressure sensors that are attached to the inner (not visible) part of the valve. To reset the system, adjust the tyre pressures to manufactures setting and driving the vehicle should reset it. This is the same procedure when new tyre are fitted.
*If any of the wheels or tyres have been removed, the displayed tyre pressures may not be valid. Drive the vehicle for at least 15 minutes in order to re-calibrate the system.
The Tyre Pressure Monitoring System (TPMS) can be adjusted for Light load and Heavy load. The TPMS can be adjusted via the Vehicle info, Tyre information, and TPM load setting instrument panel menus.
Use the menu control buttons on the left side of the steering wheel to display and navigate through the instrument panel menus.
The instrument panel can be used to display the recommended cold tyre pressures for the vehicle. The tyre pressure look-up table can be accessed via the Vehicle info, Tyre information and Recommended pressures menus
*Wheels fitted with a TPMS can be visually identified by the external metal lock nut and valve, see image (1)
*Not all vehicles have a Tyre Pressure Monitoring System (TPMS) fitted.
Before resetting the tyre pressure monitoring system for the Jaguar E-PACE
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.