Kia Rio 2017 to 2026
TPMS Reset / Tyre Pressure Monitor
Kia Rio Reset Tyre Monitor / Calibration
To reset the tyre pressure monitoring system:
(1) Start the engine
(2) Pressure and hold the Tyre pressure monitor reset button on the dash just right of the steering wheel until the
tyre deflation warning light housed within the speedometer flashes.
Manufacturer Year: 17 - 26 · Tyre Size: 185/65R15
Before resetting the tyre pressure monitor: Kia Rio
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.