Mercedes Benz Sprinter 2023
TPMS Reset / Tyre Pressure Monitor
Mercedes Benz Sprinter Reset Tyre Monitor / Calibration
Restarting the tyre pressure monitor
Requirements:
• The recommended tyre pressure is correctly set for the respective operating condition on each of the wheels.
• Restart the tyre pressure monitoring system in the following situations:
- The tyre pressure has changed.
- The wheels or tyres have been changed or newly fitted.
On-board computer:
► Service ► Tyres
► Scroll down in the menu.
► The Use current pressures as new reference values? message appears in the multifunction display.
► Confirm the message to initiate a restart.
The Tyre press. monitor restarted message appears in the multifunction display.
Current warning messages are deleted and the flat tyre yellow warning lamp goes out.
After you have driven for a few minutes, the system checks whether the current tyre pressures are within the specified range. The current tyre pressures are then accepted as reference values and monitored.
Manufacturer Year: 2023 · Tyre Size: 235/65R16
Before resetting the tyre pressure monitor: Mercedes Benz Sprinter 2023
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.