Peugeot 308 2017 Tyre Pressure Reset (TPMS)
TPMS Reset / Tyre Pressure Monitor
How to reset / calibrate your 2017 Peugeot 308 tyre pressure monitoring system
Peugeot 308 Reset Tyre Monitor / Calibration Info
With the ignition on and the vehicle stationary, press this button for about 3 seconds then release it, an audible signal confirms the re-initialisation.
<img src="/wp-content/uploads/2019/07/TOUCH-SCREEN.jpg"
Re-initialisation of the system is done with the ignition on and the vehicle stationary.
(1) From the "Driving assistance" menu of the touch screen:
(2) Press "Under-inflation initialisation".
(3) Confirm the instruction by pressing "Yes", an audible signal and a message confirm the reinitialisation.
Screen C
Press the "MENU" button for access to the main menu.
(1) Press the " ◄ " or " ►" buttons to select the Personalisation-configuration menu, then confirm by pressing the OK button.
(2) Press the " ▲ " or " ▼ " button to select the Define the vehicle parameters menu, then confirm by pressing the OK button.
(3) Press the " ▲ " or " ▼ " button to select the Driving assistance menu, then the Tyre pressures menu, then the Reinitialisation menu, then confirming by pressing the OK button.
(4) An audible signal confirms the reinitialisation.
Before resetting the tyre pressure monitoring system for the Peugeot 308
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.