Porsche Taycan 4S 2019 to 2024
Jacking Procedure
Porsche Taycan 4S Jacking Procedure
A vehicle on which the levelling system is activated can move unexpectedly or tip or fall off lifting equipment, e.g. a jack or lifting platform.
This can result in serious injury and damage.
> Manually set Normal Level and switch off the levelling system before lifting the vehicle.
1. Activate the electric parking brake.
2. Turn off the vehicle.
3. Secure the vehicle to prevent it from rolling away, e.g. by placing wheel chocks at the wheels on the opposite side.
4. Slightly loosen the wheel bolts or wheel nuts on the wheel to be changed.
5. Lift the vehicle only at the specified jacking points.
6. Raise the vehicle until the wheel lifts off the ground.
This can result in serious injury and damage.
> Manually set Normal Level and switch off the levelling system before lifting the vehicle.
1. Activate the electric parking brake.
2. Turn off the vehicle.
3. Secure the vehicle to prevent it from rolling away, e.g. by placing wheel chocks at the wheels on the opposite side.
4. Slightly loosen the wheel bolts or wheel nuts on the wheel to be changed.
5. Lift the vehicle only at the specified jacking points.
6. Raise the vehicle until the wheel lifts off the ground.
Manufacturer Year: 19 - 24 · Tyre Size: 225/55R19
Before lifting the vehicle: Porsche Taycan 4S
Use the specified lifting points
Follow the vehicle-specific procedure shown above. Do not assume a convenient edge, suspension part or battery casing is a lifting point. Check that the jack and any supports are suitable for the vehicle and the work.
Choose a safe place
The vehicle must be on firm, level ground and secured against movement as specified in its instructions. If the roadside position is unsafe, seek assistance rather than attempting a wheel change beside moving traffic.
A jack is not a working support
Never work beneath a vehicle supported only by a jack. Work requiring access underneath needs appropriate support and the correct procedure. Vehicles with special suspension or lifting modes may require additional preparation.