Skoda Yeti 2009 to 2017
TPMS Reset / Tyre Pressure Monitor
Skoda Yeti Reset Tyre Monitor / Calibration
(1) Switch the ignition on. …
(2) Press and hold the Set / Calibrate tyre pressure monitor button on the centre console (as shown above) until the light goes out on the dash board display (as shown below)
Manufacturer Year: 09 - 17 · Tyre Size: 215/60R16
Before resetting the tyre pressure monitor: Skoda Yeti
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.