Vauxhall Astra Electric 2024 Tyre Pressure Reset (TPMS)
TPMS Reset / Tyre Pressure Monitor
How to reset / calibrate your 2024 Vauxhall Astra Electric tyre pressure monitoring system
Before resetting your Vauxhall Astra Electric, check and adjust all four tyres when cold to the pressures shown on the vehicle placard for your tyre size and load. Apply the parking brake.
Start the tyre pressure-loss system initialisation through the InfoDisplay. A confirmation message appears after the initialisation. Drive the vehicle to allow the system to learn the corrected tyre rolling circumferences. The exact screen layout can vary with the equipment fitted.
Initialise again after changing tyre pressures, changing a wheel or rotating the wheels. This is an indirect pressure-loss system: initialisation learns the tyre rolling circumferences rather than matching individual pressure sensors to wheel positions.
Before resetting the tyre pressure monitoring system for the Vauxhall Astra Electric
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.