Vauxhall Mokka Electric 2026 Tyre Pressure Reset (TPMS)
TPMS Reset / Tyre Pressure Monitor
How to reset / calibrate your 2026 Vauxhall Mokka Electric tyre pressure monitoring system
1. Check all four tyres when cold and adjust them to the pressures on the vehicle tyre-pressure label for the fitted tyres and load.
2. Park safely and apply the parking brake. Use the Info Display to initialise the tyre deflation detection system.
3. Wait for the confirmation pop-up. The system learns the new reference values automatically while driving.
Initialise again after changing tyre pressures, changing the load condition, or swapping or replacing wheels. This indirect system compares wheel rotation; it does not replace regular pressure checks. If a warning remains after the pressures have been corrected and the system initialised, have the fault checked.
Before resetting the tyre pressure monitoring system for the Vauxhall Mokka Electric
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.