Alfa Romeo Giulia

Alfa RomeoGiulia2023Tyre Pressures225/45R18

Tyre Pressures: Standard & LadenWheel Nut Torque SettingPCDFront & Rear OffsetCentre BoreEngine Oil SpecificationsTyre Pressure Placard

Standard Load Tyre Pressures

Front: 32 PSI (2.2 bar / 220 kPa) - Rear: 35 PSI (2.4 bar / 240 kPa)

Convert front 32 PSI → · Convert rear 35 PSI →

More about standard load tyre pressures

Fully Laden Pressures

Front: 39 PSI (2.7 bar / 270 kPa) - Rear: 44 PSI (3.0 bar / 300 kPa)

Convert front 39 PSI → · Convert rear 44 PSI →

More about fully laden pressures

Tyre Size Converter - Wheel View

Original tyre
Comparison tyre

Side view comparison

Diameter check only

Tread view comparison

Original tyre

Comparison tyre

View recommended tyre size conversions

Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Tyre Pressure Placard

Giulia tyre pressure placard

More about this placard

Wheel Nut Torque Setting

130 Nm

12345
5-bolt tightening pattern
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.

More about wheel torque

Wheel & Technical Information

PCD
5x110
Centre bore
65.1
Front offset
33
Rear offset
33

More about wheel fitment

Engine Oil Information

Engine / Variant
2.0 T4 MultiAir
2.2 JTD
Oil specification
2.0 T4 MultiAir: SAE 0W-30 ACEA C2, FIAT 9.55535-GS1
2.2 JTD: SAE 0W-20 ACEA C2, FIAT 9.55535-DSX (some earlier 210 HP without AdBlue: SAE 0W-30, FIAT 9.55535-DS1)
Oil capacity
2.0 T4 MultiAir: 5.2 L including filter
2.2 JTD: 3.6 L RWD / 4.4 L AWD including filter

More about engine oil