Alfa Romeo Stelvio

Alfa RomeoStelvio2022Tyre Pressures235/60R18

Tyre Pressures: Standard & LadenWheel Nut Torque SettingPCDFront & Rear OffsetCentre BoreEngine Oil Specifications

Standard Load Tyre Pressures

Front: 31 PSI (2.1 bar / 210 kPa) - Rear: 33 PSI (2.3 bar / 230 kPa)

Convert front 31 PSI → · Convert rear 33 PSI →

More about standard load tyre pressures

Fully Laden Pressures

Front: 33 PSI (2.3 bar / 230 kPa) - Rear: 38 PSI (2.6 bar / 260 kPa)

Convert front 33 PSI → · Convert rear 38 PSI →

More about fully laden pressures

Tyre Size Converter - Wheel View

Original tyre
Comparison tyre

Side view comparison

Diameter check only

Tread view comparison

Original tyre

Comparison tyre

View recommended tyre size conversions

Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Wheel Nut Torque Setting

120 Nm

12345
5-bolt tightening pattern
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.

More about wheel torque

Wheel & Technical Information

PCD
5x110
Centre bore
65.1
Front offset
29
Rear offset
29

More about wheel fitment

Engine Oil Information

Engine / Variant
2.0 T4 MultiAir
2.2 JTD
2.9 V6 Quadrifoglio
Oil specification
2.0 T4 MultiAir: SAE 0W-30 ACEA C2, FIAT 9.55535-GS1
2.2 JTD: SAE 0W-20 ACEA C2, FIAT 9.55535-DSX (some earlier 210 HP without AdBlue: SAE 0W-30, FIAT 9.55535-DS1)
2.9 V6: SAE 5W-40 ACEA C3, FIAT 9.55535-GH2
Oil capacity
2.0 T4 MultiAir: 5.2 L including filter
2.2 JTD: 4.4 L AWD including filter
2.9 V6: 6.5 L including filter

More about engine oil