AlfaMiTo2011Data Index

Tyre Pressures: Standard & LadenWheel Nut Torque SettingPCDFront & Rear OffsetCentre BoreEngine Oil Specifications

The figures below apply to the selected MiTo 2011 with 215/40R18 tyres. Check the vehicle placard or owner’s manual before adjusting pressures, particularly when carrying additional load.

TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIbarkPaPSIbar2302.3332102.130——————2302.3332302.333215/40R18120 Nm

Standard Load Tyre Pressures

Front: 33 PSI (2.3 bar / 230 kPa) - Rear: 30 PSI (2.1 bar / 210 kPa)

More about standard load tyre pressures

Fully Laden Pressures

Front: 33 PSI (2.3 bar / 230 kPa) - Rear: 33 PSI (2.3 bar / 230 kPa)

More about fully laden pressures

Wheel Nut Torque Setting

120 Nm

4-bolt tightening pattern
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.

More about wheel torque

Wheel & Technical Information

PCD: 4x98
Centre bore: 58.1
Front offset: 39
Rear offset: 39

More about wheel fitment

Engine Oil Information

Engine / Variant: 1.4 Petrol
1.4 Turbo Petrol
1.4 MultiAir
1.4 Turbo MultiAir
0.9 TwinAir
1.3 JTDm
1.6 JTDm
Oil specification: Petrol/MultiAir: SAE 5W-40 ACEA C3, FIAT 9.55535-S2
Diesel: SAE 5W-30, FIAT 9.55535-S1
later TwinAir versions use handbook-specified low-viscosity oil
Oil capacity: 1.4 Petrol: 2.9 L
1.4 Turbo Petrol: 3.3 L
1.4 MultiAir: 3.4 L
1.4 Turbo MultiAir: 3.5 L
1.3 JTDm: 3.2 L
1.6 JTDm: 4.6 L

More about engine oil