Audi
Audi A1
The figures below apply to the selected Audi A1 2013 with 225/35R18 tyres. Check the vehicle placard or owner’s manual before adjusting pressures, particularly when carrying additional load.
Front pressure36 PSI
Rear pressure32 PSI
Wheel nut torque120 Nm
Tyre size225/35R18
Wheel & Technical Information
- PCD
- 5x100
- Centre bore
- 57.1 mm
- Front offset
- ET39.5
- Rear offset
- ET39.5
Tyre Pressure Placard


TPMS / Tyre Pressure Monitor Reset
Storing Tyre Pressures
Make sure all four tyres are inflated to the correct pressures for the vehicle load.
Switch the ignition on.
Select: CAR > Car systems > Servicing & checks > Tyre pressure monitoring > Store tyre pressures > Yes, store now.
Store the pressures again whenever tyre pressures are adjusted or a tyre or wheel is changed.
