TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIkPaPSI2203220029————2603825036205/55R16120 Nm
LOADECOFULLY
LADENkPaPSIkPaPSI2203220029————2603825036205/55R16120 Nm
Standard Load Tyre Pressures
Front: 32 PSI (2.2 bar / 220 kPa) - Rear: 29 PSI (2.0 bar / 200 kPa)
Fully Laden Pressures
Front: 38 PSI (2.6 bar / 260 kPa) - Rear: 36 PSI (2.5 bar / 250 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Diameter check only
Tread view comparison
Original tyre
Comparison tyre
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel Nut Torque Setting
120 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
Engine Oil Information
- Engine / Variant
- 1.0 TFSI
1.4 TFSI/COD
1.8 TFSI
1.4 TDI
1.6 TDI
2.0 TDI (market/year dependent) - Oil specification
- Audi/VW engine-specific approval required
MY2018 1.0 TFSI 95 PS: VW 502 00 - Oil capacity
- MY2018 1.0 TFSI 95 PS: 4.0 L
other engines vary by engine code/year — use exact Audi specification
TPMS / Tyre Pressure Monitor Reset
Storing Tyre Pressures
Make sure all four tyres are inflated to the correct pressures for the vehicle load.
Switch the ignition on.
Select: CAR > Car systems > Servicing & checks > Tyre pressure monitoring > Store tyre pressures > Yes, store now.
Store the pressures again whenever tyre pressures are adjusted or a tyre or wheel is changed.
