Audi A1

AudiA12020Tyre Pressures185/65R15

Tyre Pressures: Standard & LadenWheel Nut Torque SettingPCDFront & Rear OffsetCentre BoreTPMS ResetTyre Pressure Placard & Where It’s Located

Standard Load Tyre Pressures

Front: 32 PSI (2.2 bar / 220 kPa) - Rear: 32 PSI (2.2 bar / 220 kPa)

Convert front 32 PSI → · Convert rear 32 PSI →

More about standard load tyre pressures

Fully Laden Pressures

Front: 36 PSI (2.5 bar / 250 kPa) - Rear: 36 PSI (2.5 bar / 250 kPa)

Convert front 36 PSI → · Convert rear 36 PSI →

More about fully laden pressures

Tyre Size Converter - Wheel View

Original tyre
Comparison tyre

Side view comparison

Diameter check only

Tread view comparison

Original tyre

Comparison tyre

View recommended tyre size conversions

Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Tyre Pressure Placard

A1 tyre pressure placard

More about this placard

A1 tyre pressure placard location

More about the placard location

Wheel Nut Torque Setting

120 Nm

12345
5-bolt tightening pattern
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.

More about wheel torque

Wheel & Technical Information

PCD
5x100
Centre bore
57.1
Front offset
40
Rear offset
40

More about wheel fitment

TPMS / Tyre Pressure Monitor Reset

Storing Tyre Pressures

Inflate all four tyres to the correct pressures for the current load.

Switch the ignition on.

In the MMI select: CAR > Settings & service > Tyre pressure > Store tyre pressures > Yes, store now.

Repeat after changing tyre pressures, changing tyres, or rotating/changing wheels.

A1 tyre pressure monitor reset

More about resetting TPMS