AudiA32016Tyre Pressures235/35R19
TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIkPaPSI2303421031————————235/35R19120 Nm
LOADECOFULLY
LADENkPaPSIkPaPSI2303421031————————235/35R19120 Nm
Standard Load Tyre Pressures
Front: 34 PSI (2.3 bar / 230 kPa) - Rear: 31 PSI (2.1 bar / 210 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Diameter check only
Tread view comparison
Original tyre
Comparison tyre
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel Nut Torque Setting
120 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.
Engine Oil Information
- Engine / Variant
- 1.4 TFSI e-tron
1.8 TFSI
2.0 TFSI
2.0 TDI
S3 2.0 TFSI
RS3 2.5 TFSI (generation/year dependent) - Oil specification
- Audi/VW approval by engine: VW 502 00
VW 507 00 for applicable TDI
VW 508 00/509 00 for applicable B-cycle
RS3 2.5: VW 504 00/507 00 - Oil capacity
- 1.4 TFSI e-tron: 4.0 L
1.8 TFSI: 5.2 L
2.0 TFSI/S3: 5.7 L
2.0 TDI: 5.5 L (2016-era) / 4.0 L earlier versions
RS3 2.5: 7.1 L — match engine/year
TPMS / Tyre Pressure Monitor Reset
Storing Tyre Pressures
Inflate all four tyres to the correct pressures for the vehicle load. Switch the ignition on. In the Audi MMI select CAR > Car systems > Servicing & checks > Tyre pressure monitoring > Store tyre pressures, then confirm. Store the pressures again after adjusting pressures or changing tyres or wheels.
