LOADECOFULLY
LADENkPaPSIkPaPSI2603822032————2703927039255/35R19120 Nm
Standard Load Tyre Pressures
Front: 38 PSI (2.6 bar / 260 kPa) - Rear: 32 PSI (2.2 bar / 220 kPa)
Fully Laden Pressures
Front: 39 PSI (2.7 bar / 270 kPa) - Rear: 39 PSI (2.7 bar / 270 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Tread view comparison
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel Nut Torque Setting
120 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.
Engine Oil Information
- Engine / Variant
- 2.0 TFSI
3.0 TFSI S5
2.9 TFSI RS5
TDI variants (generation/year dependent) - Oil specification
- 2.0 TFSI: VW 502 00 (applicable later engines may use VW 508 00/509 00)
S5 3.0 TFSI B9: VW 508 00/509 00
RS5 2.9 TFSI: VW 502 00 (2018 schedule) - Oil capacity
- 2.0 TFSI B8: 4.5-4.6 L
B9: 5.2 L
S5 3.0 B8: 6.8 L / B9: 7.25 L
RS5 2.9: 7.6 L — match generation/engine
TPMS / Tyre Pressure Monitor Reset
Storing Tyre Pressures
If the tyre pressure has been changed or a tyre is replaced, it must be confirmed in the Infotainment system.
Make sure before storing that the tyre pressures of all four tyres are inflated to the correct tyre pressure and are adapted to the load.
(1) Select: Select: Menu > (Car) the CAR function
(2) Push Systems control button left (see image below)
(3) Select: Servicing & checks
(4) Select: Tyre pressure monitoring or Tyre press. loss indicator
(5) Select: Store tyre pressures
(6) Select: Yes, store now
