TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIkPaPSI2103019028————2403522032255/40R19140 Nm
LOADECOFULLY
LADENkPaPSIkPaPSI2103019028————2403522032255/40R19140 Nm
Standard Load Tyre Pressures
Front: 30 PSI (2.1 bar / 210 kPa) - Rear: 28 PSI (1.9 bar / 190 kPa)
Fully Laden Pressures
Front: 35 PSI (2.4 bar / 240 kPa) - Rear: 32 PSI (2.2 bar / 220 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Diameter check only
Tread view comparison
Original tyre
Comparison tyre
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel Nut Torque Setting
140 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.
TPMS / Tyre Pressure Monitor Reset
Storing Tyre Pressures
Inflate all four tyres correctly for the vehicle load. Switch the ignition on. In the MMI select CAR/Vehicle > Servicing & checks > Tyre pressure monitoring > Store tyre pressures, then confirm. Repeat after changing pressures, tyres or wheels.
