TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIkPaPSI2303323033————2503625036235/55R19140 Nm
LOADECOFULLY
LADENkPaPSIkPaPSI2303323033————2503625036235/55R19140 Nm
Standard Load Tyre Pressures
Front: 33 PSI (2.3 bar / 230 kPa) - Rear: 33 PSI (2.3 bar / 230 kPa)
Fully Laden Pressures
Front: 36 PSI (2.5 bar / 250 kPa) - Rear: 36 PSI (2.5 bar / 250 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Diameter check only
Tread view comparison
Original tyre
Comparison tyre
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel Nut Torque Setting
140 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.
Engine Oil Information
- Engine / Variant
- 2.0 TFSI
3.2 FSI
3.0 TFSI
2.0 TDI
3.0 TDI
SQ5 variants (generation/year dependent) - Oil specification
- 2.0 TFSI/3.2 FSI/3.0 TFSI: VW 502 00 where applicable
TDI: VW 507 00
later engines may require VW 508 00/509 00 — match exact engine/year - Oil capacity
- 2.0 TFSI (early Q5): 4.6 L
3.2 FSI: 6.2 L
later 2.0 TFSI: about 5.2 L
3.0 TFSI/TDI and SQ5 vary by engine — use exact engine/year
TPMS / Tyre Pressure Monitor Reset
Storing Tyre Pressures
Set all four tyres to the correct pressures and switch the ignition on. In the MMI select CAR > Car systems/Systems > Servicing & checks > Tyre pressure monitoring > Store tyre pressures, then confirm. Repeat after adjusting pressures or replacing tyres or wheels.
