LOADECOFULLY
LADENkPaPSIkPaPSI2303323033——————25036255/40R21140 Nm
Standard Load Tyre Pressures
Front: 33 PSI (2.3 bar / 230 kPa) - Rear: 33 PSI (2.3 bar / 230 kPa)
Fully Laden Pressures
Rear: 36 PSI (2.5 bar / 250 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Tread view comparison
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel Nut Torque Setting
140 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.
Engine Oil Information
- Engine / Variant
- 2.0 TFSI
3.2 FSI
3.0 TFSI
2.0 TDI
3.0 TDI
SQ5 variants (generation/year dependent) - Oil specification
- 2.0 TFSI/3.2 FSI/3.0 TFSI: VW 502 00 where applicable
TDI: VW 507 00
later engines may require VW 508 00/509 00 — match exact engine/year - Oil capacity
- 2.0 TFSI (early Q5): 4.6 L
3.2 FSI: 6.2 L
later 2.0 TFSI: about 5.2 L
3.0 TFSI/TDI and SQ5 vary by engine — use exact engine/year
TPMS / Tyre Pressure Monitor Reset
Storing Tyre Pressures
If the tyre pressure changes or a tyre is replaced, it must be confirmed in the Infotainment system.
Make sure before storing that the tyre pressures of all four tyres are inflated to the correct tyre pressure and are adapted to the load.
(1) Select: Select: Menu > (Car) the CAR function
(2) Push Systems control button left (see image below)
(3) Select: Servicing & checks
(4) Select: Tyre pressure monitoring or Tyre press. loss indicator
(5) Select: Store tyre pressures
(6) Select: Yes, store now
