Audi TT

AudiTT2020Tyre Pressures225/55R16

Tyre Pressures: Standard & LadenWheel Nut Torque SettingEngine Oil SpecificationsTPMS ResetTyre Pressure Placard & Where It’s Located

Standard Load Tyre Pressures

Front: 32 PSI (2.2 bar / 220 kPa) - Rear: 26 PSI (1.8 bar / 180 kPa)

More about standard load tyre pressures

Fully Laden Pressures

Rear: 29 PSI (2.0 bar / 200 kPa)

More about fully laden pressures

Tyre Size Converter - Wheel View

Original tyre
Comparison tyre

Side view comparison

Diameter check only

Tread view comparison

Original tyre

Comparison tyre

View recommended tyre size conversions

Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Wheel Nut Torque Setting

120 Nm

12344 bolts123455 bolts1234566 bolts
Choose the pattern matching your wheel
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.

More about wheel torque

Engine Oil Information

Engine / Variant
TT/TTS 2.0 TFSI
TT RS 2.5 TFSI
Oil specification
TT 2.0: VW 508 00 (MY2020)
TTS 2.0: VW 504 00
TT RS 2.5: VW 504 00
Oil capacity
TT/TTS 2.0 TFSI: 5.7 L with filter
TT RS 2.5 TFSI: 7.1 L with filter

More about engine oil

TPMS / Tyre Pressure Monitor Reset

Storing Tyre Pressures

Make sure all four tyres are inflated to the specified pressures. Switch the ignition on. In the MMI select CAR > Car systems > Servicing & checks > Tyre pressure monitoring > Store tyre pressures > Yes, store now. Repeat after changing tyre pressures, tyres or wheels.

TT tyre pressure monitor reset

More about resetting TPMS