The figures below apply to the selected C1 2022 with 165/60R15 tyres. Check the vehicle placard or owner’s manual before adjusting pressures, particularly when carrying additional load.
LOADECOFULLY
LADENkPaPSIkPaPSI2303323033————2303323033165/60R15100 Nm
Standard Load Tyre Pressures
Front: 33 PSI (2.3 bar / 230 kPa) - Rear: 33 PSI (2.3 bar / 230 kPa)
Fully Laden Pressures
Front: 33 PSI (2.3 bar / 230 kPa) - Rear: 33 PSI (2.3 bar / 230 kPa)
Wheel Nut Torque Setting
100 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.
TPMS / Tyre Pressure Monitor Reset
Reinitialisation of the system is done with the ignition on (ignition switch in the "ON" position or "ON" mode) and the vehicle stationary.
► Open the glove box.
► Press the reinitialisation button. (see above image)
► The flat tyre warning lamp flashes 3 times in the instrument panel when the reinitialisation is done.
► Wait a few minutes before switching off the ignition (ignition switch in the "ACC" or "LOCK" position, or "OFF" mode).
Please Note:
The system monitors the pressures in the four tyres, once the vehicle is moving.
It compares the information given by the four wheel speed sensors with reference values, which must be reinitialised every time the tyre pressures are adjusted or a wheel changed.
The system triggers an alert as soon as it detects a drop in the inflation pressure of one or more tyres.
