Fiat 500 / 595 Abarth

Fiat500 / 595 Abarth2019Tyre Pressures195/45R16

Tyre Pressures: Standard & LadenWheel Nut Torque SettingPCDFront & Rear OffsetCentre BoreTyre Pressure Placard

Standard Load Tyre Pressures

Front: 32 PSI (2.2 bar / 220 kPa) - Rear: 31 PSI (2.1 bar / 210 kPa)

Convert front 32 PSI → · Convert rear 31 PSI →

More about standard load tyre pressures

Fully Laden Pressures

Front: 38 PSI (2.6 bar / 260 kPa) - Rear: 35 PSI (2.4 bar / 240 kPa)

Convert front 38 PSI → · Convert rear 35 PSI →

More about fully laden pressures

Tyre Size Converter - Wheel View

Original tyre
Comparison tyre

Side view comparison

Diameter check only

Tread view comparison

Original tyre

Comparison tyre

View recommended tyre size conversions

Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Tyre Pressure Placard

500 / 595 Abarth tyre pressure placard

More about this placard

Wheel Nut Torque Setting

100 Nm

1234
4-bolt tightening pattern
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.

More about wheel torque

Wheel & Technical Information

PCD
4x98
Centre bore
58.1
Front offset
35
Rear offset
35

More about wheel fitment