FiatPunto Grande2005Data Index

Tyre Pressures: Standard & LadenWheel Nut Torque SettingPCDFront & Rear OffsetCentre BoreTyre Pressure Placard

The figures below apply to the selected Punto Grande 2005 with 185/65R15 tyres. Check the vehicle placard or owner’s manual before adjusting pressures, particularly when carrying additional load.

TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIbarkPaPSIbar2202.2322002.029——————2202.2322202.232185/65R15120 Nm

Standard Load Tyre Pressures

Front: 32 PSI (2.2 bar / 220 kPa) - Rear: 29 PSI (2.0 bar / 200 kPa)

More about standard load tyre pressures

Fully Laden Pressures

Front: 32 PSI (2.2 bar / 220 kPa) - Rear: 32 PSI (2.2 bar / 220 kPa)

More about fully laden pressures

Wheel alignment specifications

Front Wheel Toe

Measurement	Set to	Setting tolerance	Check minimum	Check maximum
Front axle — total toe(Millimetres)	+1.0 mm	± 1.0 mm(0.0 mm to +2.0 mm)	0.0 mm	+2.0 mm
Front axle — total toe(Degrees and minutes)	+0°08′	± 0°08′(0°00′ to +0°16′)	0°00′	+0°16′

More about wheel alignment

Tyre Pressure Placard

Wheel Nut Torque Setting

120 Nm

4-bolt tightening pattern
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.

More about wheel torque

Wheel & Technical Information

PCD: 4x100
Centre bore: 56.6
Front offset: 43
Rear offset: 43

More about wheel fitment