Fiat Qubo

FiatQubo2019Tyre Pressures185/65R15

Tyre PressuresWheel Nut Torque SettingPCDFront & Rear OffsetCentre Bore

Standard Load Tyre Pressures

Front: 36 PSI (2.5 bar / 250 kPa) - Rear: 33 PSI (2.3 bar / 230 kPa)

More about standard load tyre pressures

Tyre Size Converter - Wheel View

Original tyre
Comparison tyre

Side view comparison

Diameter check only

Tread view comparison

Original tyre

Comparison tyre

View recommended tyre size conversions

Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Wheel alignment specifications

Front Wheel Toe

MeasurementSet toSetting toleranceCheck minimumCheck maximum
Front axle — total toe(Millimetres)−1.0 mm± 1.0 mm(−2.0 mm to 0.0 mm)−2.0 mm0.0 mm
Front axle — total toe(Degrees and minutes)−0°09′± 0°09′(−0°18′ to 0°00′)−0°18′0°00′

More about wheel alignment

Wheel Nut Torque Setting

86 Nm

1234
4-bolt tightening pattern
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.

More about wheel torque

Wheel & Technical Information

PCD
4x98
Centre bore
58.1
Front offset
44
Rear offset
44

More about wheel fitment