Ford Focus ST

FordFocus2006STTyre Pressures225/40R18

Tyre Pressures: Standard & LadenWheel Nut Torque SettingPCDFront & Rear OffsetCentre BoreTyre Pressure Placard & Where It’s Located
VariantST

ST

Standard Load Tyre Pressures

Front: 33 PSI (2.3 bar / 230 kPa) - Rear: 30 PSI (2.1 bar / 210 kPa)

Convert front 33 PSI → · Convert rear 30 PSI →

More about standard load tyre pressures

Fully Laden Pressures

Front: 33 PSI (2.3 bar / 230 kPa) - Rear: 30 PSI (2.1 bar / 210 kPa)

Convert front 33 PSI → · Convert rear 30 PSI →

More about fully laden pressures

Tyre Size Converter - Wheel View

Original tyre
Comparison tyre

Side view comparison

Diameter check only

Tread view comparison

Original tyre

Comparison tyre

View recommended tyre size conversions

Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Tyre Pressure Placard

Focus tyre pressure placard

More about this placard

Focus tyre pressure placard location

More about the placard location

Wheel Nut Torque Setting

110 Nm

12345
5-bolt tightening pattern
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.

More about wheel torque

Wheel & Technical Information

PCD
5x108
Centre bore
63.4
Front offset
47.5
Rear offset
47.5

More about wheel fitment