Ford Ranger

FordRanger2020Tyre Pressures265/65R17

Tyre Pressures: Standard & LadenWheel Nut Torque SettingPCDCentre BoreTyre Pressure Placard & Where It’s Located

Standard Load Tyre Pressures

Front: 38 PSI (2.6 bar / 260 kPa) - Rear: 38 PSI (2.6 bar / 260 kPa)

Convert front 38 PSI → · Convert rear 38 PSI →

More about standard load tyre pressures

Fully Laden Pressures

Front: 38 PSI (2.6 bar / 260 kPa) - Rear: 44 PSI (3.0 bar / 300 kPa)

Convert front 38 PSI → · Convert rear 44 PSI →

More about fully laden pressures

Tyre Size Converter - Wheel View

Original tyre
Comparison tyre

Side view comparison

Diameter check only

Tread view comparison

Original tyre

Comparison tyre

View recommended tyre size conversions

Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Tyre Pressure Placard

Ranger tyre pressure placard

More about this placard

Ranger tyre pressure placard location

More about the placard location

Wheel Nut Torque Setting

135 Nm

123456
6-bolt tightening pattern
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.

More about wheel torque

Wheel & Technical Information

PCD
6x139.7
Centre bore
93.1

More about wheel fitment