HondaCR-V2010Data Index

Tyre Pressures: Standard & LadenWheel Nut Torque SettingTyre Pressure Placard & Where It’s Located

The figures below apply to the selected CR-V 2010 with 225/65R17 tyres. Check the vehicle placard or owner’s manual before adjusting pressures, particularly when carrying additional load.

TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIbarkPaPSIbar2102.1302102.130——————2102.1302302.333225/65R17108 Nm

Standard Load Tyre Pressures

Front: 30 PSI (2.1 bar / 210 kPa) - Rear: 30 PSI (2.1 bar / 210 kPa)

More about standard load tyre pressures

Fully Laden Pressures

Front: 30 PSI (2.1 bar / 210 kPa) - Rear: 33 PSI (2.3 bar / 230 kPa)

More about fully laden pressures

Wheel alignment specifications

Front Wheel Toe

Measurement	Set to	Setting tolerance	Check minimum	Check maximum
Front axle — total toe(Millimetres)	0.0 mm	± 2.0 mm(−2.0 mm to +2.0 mm)	−2.0 mm	+2.0 mm
Front axle — total toe(Degrees and minutes)	0°00′	± 0°16′(−0°16′ to +0°16′)	−0°16′	+0°16′

More about wheel alignment

Tyre Pressure Placard

Wheel Nut Torque Setting

108 Nm

Choose the pattern matching your wheel
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.

More about wheel torque