Hyundai Bayon

HyundaiBayon2023Tyre Pressures205/55R17

Tyre Pressures: Standard & LadenWheel Nut Torque SettingTPMS ResetTyre Pressure Placard

Standard Load Tyre Pressures

Front: 34 PSI (2.3 bar / 230 kPa) - Rear: 31 PSI (2.1 bar / 210 kPa)

More about standard load tyre pressures

Fully Laden Pressures

Front: 35 PSI (2.4 bar / 240 kPa) - Rear: 38 PSI (2.6 bar / 260 kPa)

More about fully laden pressures

Tyre Size Converter - Wheel View

Original tyre
Comparison tyre

Side view comparison

Diameter check only

Tread view comparison

Original tyre

Comparison tyre

View recommended tyre size conversions

Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Wheel Nut Torque Setting

130 Nm

12344 bolts123455 bolts1234566 bolts
Choose the pattern matching your wheel
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.

More about wheel torque

TPMS / Tyre Pressure Monitor Reset

Storing Tyre Pressures

If the tyre pressure has been changed or a tyre is replaced, it must be reset by pressing the TPMS reset button on the dash, this is located just behind the right side of the steering wheel.

Press and hold the button until it confirms the reset on the dash.

Bayon tyre pressure monitor reset

More about resetting TPMS