Jaguar E-PACE

JaguarE-PACE2017Tyre Pressures235/65R17

Tyre Pressures: Standard & LadenWheel Nut Torque SettingTPMS ResetTyre Pressure Placard & Where It’s Located

Standard Load Tyre Pressures

Front: 35 PSI (2.4 bar / 240 kPa) - Rear: 31 PSI (2.1 bar / 210 kPa)

More about standard load tyre pressures

Fully Laden Pressures

Front: 37 PSI (2.6 bar / 260 kPa) - Rear: 37 PSI (2.6 bar / 260 kPa)

More about fully laden pressures

Tyre Size Converter - Wheel View

Original tyre
Comparison tyre

Side view comparison

Diameter check only

Tread view comparison

Original tyre

Comparison tyre

View recommended tyre size conversions

Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Wheel alignment specifications

Front Wheel Toe

MeasurementSet toSetting toleranceCheck minimumCheck maximum
Front axle — total toe(Millimetres)+1.9 mm± 1.6 mm(+0.3 mm to +3.5 mm)+0.3 mm+3.5 mm
Front axle — total toe(Degrees and minutes)+0°14′± 0°12′(+0°02′ to +0°26′)+0°02′+0°26′

More about wheel alignment

Wheel Nut Torque Setting

133 Nm

12344 bolts123455 bolts1234566 bolts
Choose the pattern matching your wheel
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.

More about wheel torque

TPMS / Tyre Pressure Monitor Reset

Resetting of the TPMS (Tyre Pressure Monitoring System) is not required on vehicles with pressure sensors that are attached to the inner (not visible) part of the valve. To reset the system, adjust the tyre pressures to manufactures setting and driving the vehicle should reset it. This is the same procedure when new tyre are fitted.

*If any of the wheels or tyres have been removed, the displayed tyre pressures may not be valid. Drive the vehicle for at least 15 minutes in order to re-calibrate the system.

The Tyre Pressure Monitoring System (TPMS) can be adjusted for Light load and Heavy load. The TPMS can be adjusted via the Vehicle info, Tyre information, and TPM load setting instrument panel menus.

Use the menu control buttons on the left side of the steering wheel to display and navigate through the instrument panel menus.

The instrument panel can be used to display the recommended cold tyre pressures for the vehicle. The tyre pressure look-up table can be accessed via the Vehicle info, Tyre information and Recommended pressures menus

*Wheels fitted with a TPMS can be visually identified by the external metal lock nut and valve, see image (1)

*Not all vehicles have a Tyre Pressure Monitoring System (TPMS) fitted.

More about resetting TPMS