LOADECOFULLY
LADENkPaPSIkPaPSI2303423034————2403524035235/60R18133 Nm
Standard Load Tyre Pressures
Front: 34 PSI (2.3 bar / 230 kPa) - Rear: 34 PSI (2.3 bar / 230 kPa)
Fully Laden Pressures
Front: 35 PSI (2.4 bar / 240 kPa) - Rear: 35 PSI (2.4 bar / 240 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Tread view comparison
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel Nut Torque Setting
133 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.
TPMS / Tyre Pressure Monitor Reset
Resetting of the TPMS (Tyre Pressure Monitoring System) is not required on vehicles with pressure sensors that are attached to the inner (not visible) part of the valve. To reset the system, adjust the tyre pressures to manufactures setting and driving the vehicle should reset it. This is the same procedure when new tyre are fitted.
*If any of the wheels or tyres have been removed, the displayed tyre pressures may not be valid. Drive the vehicle for at least 15 minutes in order to re-calibrate the system.
The Tyre Pressure Monitoring System (TPMS) can be adjusted for Light load and Heavy load. The TPMS can be adjusted via the Vehicle info, Tyre information, and TPM load setting instrument panel menus.
Use the menu control buttons on the left side of the steering wheel to display and navigate through the instrument panel menus.
The instrument panel can be used to display the recommended cold tyre pressures for the vehicle. The tyre pressure look-up table can be accessed via the Vehicle info, Tyre information and Recommended pressures menus
*Wheels fitted with a TPMS can be visually identified by the external metal lock nut and valve, see image (1)
*Not all vehicles have a Tyre Pressure Monitoring System (TPMS) fitted.