TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIkPaPSI2203222032————2303323033185/65R14100 Nm
LOADECOFULLY
LADENkPaPSIkPaPSI2203222032————2303323033185/65R14100 Nm
Standard Load Tyre Pressures
Front: 32 PSI (2.2 bar / 220 kPa) - Rear: 32 PSI (2.2 bar / 220 kPa)
Fully Laden Pressures
Front: 33 PSI (2.3 bar / 230 kPa) - Rear: 33 PSI (2.3 bar / 230 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Diameter check only
Tread view comparison
Original tyre
Comparison tyre
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel alignment specifications
Front Wheel Toe
| Measurement | Set to | Setting tolerance | Check minimum | Check maximum |
|---|---|---|---|---|
| Front axle — total toe(Millimetres) | 0.0 mm | ± 1.0 mm(−1.0 mm to +1.0 mm) | −1.0 mm | +1.0 mm |
| Front axle — total toe(Degrees and minutes) | 0°00′ | ± 0°09′(−0°09′ to +0°09′) | −0°09′ | +0°09′ |
Wheel Nut Torque Setting
100 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.