TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIkPaPSI2303421031————2403525036185/65R15118 Nm
LOADECOFULLY
LADENkPaPSIkPaPSI2303421031————2403525036185/65R15118 Nm
Standard Load Tyre Pressures
Front: 34 PSI (2.3 bar / 230 kPa) - Rear: 31 PSI (2.1 bar / 210 kPa)
Fully Laden Pressures
Front: 35 PSI (2.4 bar / 240 kPa) - Rear: 36 PSI (2.5 bar / 250 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Diameter check only
Tread view comparison
Original tyre
Comparison tyre
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel alignment specifications
Front Wheel Toe
| Measurement | Set to | Setting tolerance | Check minimum | Check maximum |
|---|---|---|---|---|
| Front axle — total toe(Millimetres) | +1.4 mm | ± 1.4 mm(0.0 mm to +2.8 mm) | 0.0 mm | +2.8 mm |
| Front axle — total toe(Degrees and minutes) | +0°12′ | ± 0°12′(0°00′ to +0°24′) | 0°00′ | +0°24′ |
Front Wheel Toe
| Measurement | Set to | Setting tolerance | Check minimum | Check maximum |
|---|---|---|---|---|
| Front axle — total toe(Millimetres) | +1.1 mm | ± 1.4 mm(−0.3 mm to +2.5 mm) | −0.3 mm | +2.5 mm |
| Front axle — total toe(Degrees and minutes) | +0°09′ | ± 0°12′(−0°03′ to +0°21′) | −0°03′ | +0°21′ |
Wheel Nut Torque Setting
118 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.
TPMS / Tyre Pressure Monitor Reset
To reset the tyre pressure monitoring system:
(1) Start the engine
(2) Pressure and hold the Tyre pressure monitor reset button on the dash just right of the steering wheel until the
tyre deflation warning light housed within the speedometer flashes.
