TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIkPaPSI2603827039————2603827039245/40R18103 Nm
LOADECOFULLY
LADENkPaPSIkPaPSI2603827039————2603827039245/40R18103 Nm
Standard Load Tyre Pressures
Front: 38 PSI (2.6 bar / 260 kPa) - Rear: 39 PSI (2.7 bar / 270 kPa)
Fully Laden Pressures
Front: 38 PSI (2.6 bar / 260 kPa) - Rear: 39 PSI (2.7 bar / 270 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Diameter check only
Tread view comparison
Original tyre
Comparison tyre
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel alignment specifications
Front Wheel Toe
| Measurement | Set to | Setting tolerance | Check minimum | Check maximum |
|---|---|---|---|---|
| Front axle — total toe(Millimetres) | +0.5 mm | ± 1.0 mm(−0.5 mm to +1.5 mm) | −0.5 mm | +1.5 mm |
| Front axle — total toe(Degrees and minutes) | +0°04′ | ± 0°08′(−0°04′ to +0°12′) | −0°04′ | +0°12′ |
Front Wheel Toe
| Measurement | Set to | Setting tolerance | Check minimum | Check maximum |
|---|---|---|---|---|
| Front axle — total toe(Millimetres) | +0.5 mm | ± 1.0 mm(−0.5 mm to +1.5 mm) | −0.5 mm | +1.5 mm |
| Front axle — total toe(Degrees and minutes) | +0°04′ | ± 0°08′(−0°04′ to +0°12′) | −0°04′ | +0°12′ |
Wheel Nut Torque Setting
103 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.