TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIkPaPSI2503625036————2503625036235/55R20103 Nm
LOADECOFULLY
LADENkPaPSIkPaPSI2503625036————2503625036235/55R20103 Nm
Standard Load Tyre Pressures
Front: 36 PSI (2.5 bar / 250 kPa) - Rear: 36 PSI (2.5 bar / 250 kPa)
Fully Laden Pressures
Front: 36 PSI (2.5 bar / 250 kPa) - Rear: 36 PSI (2.5 bar / 250 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Diameter check only
Tread view comparison
Original tyre
Comparison tyre
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel alignment specifications
Front Wheel Toe
| Measurement | Set to | Setting tolerance | Check minimum | Check maximum |
|---|---|---|---|---|
| Front axle — total toe(Millimetres) | +0.5 mm | ± 1.0 mm(−0.5 mm to +1.5 mm) | −0.5 mm | +1.5 mm |
| Front axle — total toe(Degrees and minutes) | +0°05′ | ± 0°10′(−0°05′ to +0°15′) | −0°05′ | +0°15′ |
Wheel Nut Torque Setting
103 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.