Mercedes BenzSprinter2024Data Index
The figures below apply to the selected Sprinter 2024 with 225/65R16 tyres. Check the vehicle placard or owner’s manual before adjusting pressures, particularly when carrying additional load.
LOADECOFULLY
LADENkPaPSIkPaPSI3304845065————————225/65R16240 Nm
Standard Load Tyre Pressures
Front: 48 PSI (3.3 bar / 330 kPa) - Rear: 65 PSI (4.5 bar / 450 kPa)
Wheel Nut Torque Setting
240 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.
TPMS / Tyre Pressure Monitor Reset
Restarting the tyre pressure monitor
Requirements:
• The recommended tyre pressure is correctly set for the respective operating condition on each of the wheels.
• Restart the tyre pressure monitoring system in the following situations:
- The tyre pressure has changed.
- The wheels or tyres have been changed or newly fitted.
On-board computer:
► Service ► Tyres
► Scroll down in the menu.
► The Use current pressures as new reference values? message appears in the multifunction display.
► Confirm the message to initiate a restart.
The Tyre press. monitor restarted message appears in the multifunction display.
Current warning messages are deleted and the flat tyre yellow warning lamp goes out.
After you have driven for a few minutes, the system checks whether the current tyre pressures are within the specified range. The current tyre pressures are then accepted as reference values and monitored.