TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIkPaPSI2503622032————2503622032175/65R15105 Nm
LOADECOFULLY
LADENkPaPSIkPaPSI2503622032————2503622032175/65R15105 Nm
Standard Load Tyre Pressures
Front: 36 PSI (2.5 bar / 250 kPa) - Rear: 32 PSI (2.2 bar / 220 kPa)
Fully Laden Pressures
Front: 36 PSI (2.5 bar / 250 kPa) - Rear: 32 PSI (2.2 bar / 220 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Diameter check only
Tread view comparison
Original tyre
Comparison tyre
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel alignment specifications
Front Wheel Toe
| Measurement | Set to | Setting tolerance | Check minimum | Check maximum |
|---|---|---|---|---|
| Front axle — total toe(Millimetres) | +0.5 mm | ± 0.5 mm(0.0 mm to +1.0 mm) | 0.0 mm | +1.0 mm |
| Front axle — total toe(Degrees and minutes) | +0°04′ | ± 0°04′(0°00′ to +0°08′) | 0°00′ | +0°08′ |
Wheel Nut Torque Setting
105 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.