Peugeot 308
The figures below apply to the selected Peugeot 308 2014 with 205/50R17 tyres. Check the vehicle placard or owner’s manual before adjusting pressures, particularly when carrying additional load.
Wheel & Technical Information
Tyre Pressure Placard
TPMS / Tyre Pressure Monitor Reset
Peugeot 308 Reset Tyre Monitor / Calibration Info
With the ignition on and the vehicle stationary, press this button for about 3 seconds then release it, an audible signal confirms the re-initialisation.
<img src="/wp-content/uploads/2019/07/TOUCH-SCREEN.jpg"
Re-initialisation of the system is done with the ignition on and the vehicle stationary.
(1) From the "Driving assistance" menu of the touch screen:
(2) Press "Under-inflation initialisation".
(3) Confirm the instruction by pressing "Yes", an audible signal and a message confirm the reinitialisation.
Screen C
Press the "MENU" button for access to the main menu.
(1) Press the " ◄ " or " ►" buttons to select the Personalisation-configuration menu, then confirm by pressing the OK button.
(2) Press the " ▲ " or " ▼ " button to select the Define the vehicle parameters menu, then confirm by pressing the OK button.
(3) Press the " ▲ " or " ▼ " button to select the Driving assistance menu, then the Tyre pressures menu, then the Reinitialisation menu, then confirming by pressing the OK button.
(4) An audible signal confirms the reinitialisation.