LOADECOFULLY
LADENkPaPSIkPaPSI2403523033————2503633048205/50R17100 Nm
Standard Load Tyre Pressures
Front: 35 PSI (2.4 bar / 240 kPa) - Rear: 33 PSI (2.3 bar / 230 kPa)
Fully Laden Pressures
Front: 36 PSI (2.5 bar / 250 kPa) - Rear: 48 PSI (3.3 bar / 330 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Tread view comparison
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel Nut Torque Setting
100 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.
TPMS / Tyre Pressure Monitor Reset
Peugeot 308 Reset Tyre Monitor / Calibration Info
With the ignition on and the vehicle stationary, press this button for about 3 seconds then release it, an audible signal confirms the re-initialisation.
<img src="/wp-content/uploads/2019/07/TOUCH-SCREEN.jpg"
Re-initialisation of the system is done with the ignition on and the vehicle stationary.
(1) From the "Driving assistance" menu of the touch screen:
(2) Press "Under-inflation initialisation".
(3) Confirm the instruction by pressing "Yes", an audible signal and a message confirm the reinitialisation.
Screen C
Press the "MENU" button for access to the main menu.
(1) Press the " ◄ " or " ►" buttons to select the Personalisation-configuration menu, then confirm by pressing the OK button.
(2) Press the " ▲ " or " ▼ " button to select the Define the vehicle parameters menu, then confirm by pressing the OK button.
(3) Press the " ▲ " or " ▼ " button to select the Driving assistance menu, then the Tyre pressures menu, then the Reinitialisation menu, then confirming by pressing the OK button.
(4) An audible signal confirms the reinitialisation.