TYRE SIZE:WHEEL TORQUE:FRONTREARSTANDARD
LOADECOFULLY
LADENkPaPSIkPaPSI22032210302503625036————215/60R16120 Nm
LOADECOFULLY
LADENkPaPSIkPaPSI22032210302503625036————215/60R16120 Nm
Standard Load Tyre Pressures
Front: 32 PSI (2.2 bar / 220 kPa) - Rear: 30 PSI (2.1 bar / 210 kPa)
Eco Tyre Pressures
Front: 36 PSI (2.5 bar / 250 kPa) - Rear: 36 PSI (2.5 bar / 250 kPa)
Tyre Size Converter - Wheel View
Side view comparison
Diameter check only
Tread view comparison
Original tyre
Comparison tyre
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.
Wheel Nut Torque Setting
120 Nm
Follow the numbered order with a torque wrench and the vehicle manufacturer’s procedure.
For other bolt counts, follow the vehicle handbook.
TPMS / Tyre Pressure Monitor Reset
(1) Switch the ignition on. …
(2) Press and hold the Set / Calibrate tyre pressure monitor button on the centre console (as shown above) until the light goes out on the dash board display (as shown below)
